How to switch basement lighting? Whether you are installing new lights or upgrading an existing fixture, it is easy to forget where you started and ends. The good news is that with just a few simple steps, you can easily and inexpensively update your lighting. Here are five tips to help you along.
How To Switch Basements Lighting
If you have old lighting, first make sure that your breaker box is in the “on” position. It should be either near the main entrance or on the first floor above the basement. Then, set new basement lighting on one switch and take no extra rewires.
New fixtures need to be plugged into a hot and dry wall.
Before plugging the light into a receptacle, make sure there are no leaks or drips. Leaks can compromise the integrity of the light bulb and cause it to fail when the current is not shut off properly. Also, remember to use only UL-rated wiring for all switches and wiring to attach to the light fixture. Make sure that the switches are mounted flush with the wall and follow the packaging directions.
To test your switch, turn the power on and off several times.
If you notice that each time the light turns on and off, it takes more than 10 seconds, the unit may not be strong enough to light the entire room. Alternatively, you may want to try another switch. It is possible that the old switch supplied by the manufacturer is defective and the newer switch will work properly. Replacing a defective switch is relatively inexpensive and can be done in just a few minutes.
The wiring from new switches needs to be run to the area where you want the lights.
Most outlets can accommodate three individual lights. However, if your fixtures require four lights, you need at least six-wires to run the complete length of the room. Be sure to check the wiring carefully while it is still attached to the outlet.
Another option to consider when installing a new switch is to locate the junction box in the previous room.
Simply connect the new switch to the junction box and turn the power on. This will test the connection between the new light and the old switch. If everything is working correctly, the new switch will be installed without any issues. However, this option is often inconvenient. If your room is small, it may not be possible to place the switch in the junction box easily.
Florescent lights are very popular in recent years and installing one in an older home can be a challenge.
Florescent lights do not operate under extreme heat and can break if exposed to direct flame. Switching your lights over to fluorescent technology will increase the convenience factor and make installing the light easier. However, keep in mind that fluorescent tubes do cost more than ordinary incandescent bulbs and they do not provide as much brightness.
Installing a light fixture for a child’s room or nursery is a great way to help them become a better life saver.
Many experts recommend having a switch installed in the room to make it easier to quickly change the light in case of a medical emergency. A child can accidentally injure himself or herself if a light is left in the room unsupervised. Having the switch basements can help alleviate this worry.
Another popular home improvement need is installing a home security system.
homeowners are required by law to install a security alarm system. Some homes have a combination lock/security system. Installing an alarm system can help you keep your family safe from intruders.
Improving the appearance of a home can also increase its value.
Replacing worn carpet with new carpeting can dramatically improve the appearance of a home. Replacing worn wood trim with new hardwood trim can give a home a more classic look. These changes don’t have to be costly; simply investing a little time can result in a great new look for a home.
Installing how to switch basements lighting is an easy project that will result in a greater sense of convenience for you and your family.
With these simple steps, you can improve the overall look of your home while saving money. There are plenty of options for where to start if you are interested in making this switch. Whether you are looking for task lighting, ambient lighting or accent lighting, there is a step-by-step guide that will show you the process easily.